Follow us on : youtube googleplus googleplus Linked In facebook twitter twitter twitter twitter
Monarch Industrial Products India Pvt. Ltd
(An ISO 9001 : 2008, ISO 14001 : 2004 & OHSAS 18001 : 2007 Certified Company)
Tel:+91 4546-251020, 250076, Fax: +91 4546-253060, Mobile: +91 96009 92069
Email :, Toll Free : 1800-425-1070

Flex Putty - (SavesPast FP)
Offer Price :
INR ₹.1,832.00 INR ₹.1,282.00* / Kg
( * Inclusive of all taxes and freight )
Tough rubber like urethane repair compound for wear and impact resistance
SavesPast FP combines the properties of rubber and urethane in a trowelable repair compound. It is ideal for repairing metal, rubber, and urethane surfaces that are subject to wear and impact. The product cures to a tough, flexible rubber compound that exhibits excellent resistance to wear, tear and abrasion.

Product Specification Details

Pack Size
1 Kg
cm2/pack size/thickness
1016 Cm2 / 0.5 kg / 2.5 mm
Color and Apperance
ASTM D 1544
Black & Thick paste
Specific Gravity
ASTM D 1475-98
Mix Ratio By Weight
Mix Ratio By Volume
Pot Life @ 30°C
IS 101
Functional Cure
ASTM D 1640
Compressive Strength
More info  

Features of Flex Putty

  • Fast, cost effective and durable
  • Good resistance to tear, wear abrasion
  • Efficient alternate method of repair where welding or brazing would be undesirable or impossible
  • Can repair Intricate shape or forms/thin sections, difficult to weld metals
  • No equipment/Power supply needed
  • Unlimited cycle of repairs
  • Less Labor costs - Avoid assembly/disassembly, Pre Machining/Post Machining Resistant to chemicals and most acids, bases, solvents, and alkalis
  • Superior adhesion – forms a solid bond to steel, cast iron,
  • Stainless steel, concrete, and clean and abraded bronze, copper, and aluminum.
  • Eliminates costly wear part inventory
  • No shrinkage, expansion or distortion
  • Excellent electrical insulation characteristics
  • Can do repairs at In-situ repair, In-Plant, Workshops, Remote areas
  • No VOC's
  • Routine Maintenance and Unexpected Maintenance
  • Repair cost at fraction of replacement cost

Where to Use?

  • Chutes and hoppers
  • Elbows and transition points
  • Conveying system
  • Ash & slurry pump
  • Screw conveyors
  • Damaged rubber LININGS

Application Demo

Your Estimate Cost For Material
Select Product :
Length cm
Width cm
Thickness mm
Total Area: cm2

Total Quantity of Material Required :  Kg
Your Landing Price

Unit Converter Unit Conversion
Application Procedure
  1. Surface Preparation:
    • It is essential that all surfaces to be treated are properly prepared to obtain a strong bond between the substrate and the product as the metal putties only develop Physiochemical bonding with the substrate. Please refer SURFACE PREPARATION STANDARDS for more details.
    • Thoroughly clean the surface with SavesPast ACR, Cleaner to remove all oil, grease and dirt.
    • Grit blast surface area with 8-40 mesh grit, although roughening using mechanical alternatives such as wire brush or abrasive disc can be used to leave a clean surface, free of scale, rust and other foreign substances., to create increased surface area for better adhesion to achieve desired profile is 50-80 microns.

      Blasting Standards (SSPC, SA,NACE)
      Note for saline surface exposed metal surface: : For metals exposed to sea water or other salt solution, grit-blast and high-pressure-water-blast the area, then leave Overnight to allow any salts in the metal to "sweat" to the surface. Repeat blasting to "sweat out" all soluble salts. Perform Chloride contamination test to determine soluble salt content (should be no more than 40pm).

    • Clean surface again with SavesPast ACR, Cleaner to remove all traces of oil, grease, dust or other foreign substances from the grit blasting.
    • Repair surface as soon as possible to eliminate any changes or surface contaminants/flash rusting/oxidation.
  2. Mixing Instructions:
    • It is strongly recommended that full units be mixed, as ratios are pre-measured.
      • Add hardener to resin.
      • Mix thoroughly with screwdriver or similar tool while continuously scrape material away from sides and bottom of container until a uniform, streak-free consistency is obtained.
    • For smaller volumes
      • place resin and hardener on a flat, disposable surface such as MonKit or plastic sheet. Use a Spatula or trowel/ wide-blade tool to mix the material.
    • For larger volumes
      • Use a T-shaped mixing paddle or a propeller-type Jiffy Mixer Model ES on an electric drill. Thoroughly fold putty by vigorously moving paddle/propeller up and down until a homogenous mix of resin and hardener is attained. Thoroughly mix the components for at least 4 minutes to get uniform mixture.
      • Avoid the formation of bubbles. Do not mix more than you are able to use within the pot life. If the container is partly used, it is to be kept tightly closed.
  3. Application Instructions:
    • Primer application:
      • Apply a coat SavesPast AMP Metal Primer and allow to dry tack-free for 15 minutes. If the metal surface requires maximum tear resistance or is exposed to moisture, or if submerged in water, use SavesPast AMP, Metal Primer and also SavesPast ARP, Rubber Primer.
    • Spread mixed material on repair area and work firmly into substrate to ensure maximum surface contact .Apply a very thin scratch or smear coat directly to the prepared surface to maximize surface contact before proceeding to apply additional product to the desired build.
    • Ensure product has been worked into all cracks and voids to eliminate air bubbles. If applying several coats or layers, any previouslyapplied product must be roughened if it has been left to cure for more than 24hours.
    • Do not "feather-edge" epoxy.
    • NOTE: Flexane putties will thicken rapidly during these first two minutes of mixing, but this DOES NOT mean that the polymer is curing Wipe spatula clean, and stir again for two more minutes.
  4. Technical tips for working with epoxies
    • Working time and cure time depends on temperature and mass:
      • The higher the temperature, the faster the cure.
      • The larger the mass of material mixed, the faster the cure due to exothermal reaction.
    • To speed the cure of epoxies at low temperatures:
      • Store epoxy at room temperature.
      • Pre-heat repair surface until warm to the touch.
    • To slow the cure of epoxies at high temperatures:
      • Mix epoxy in small masses to prevent rapid curing.
      • Cool resin/hardener components.
      • Place fiberglass sheet, expanded metal, or mechanical fasteners between repair area and SavesPast TP prior to application.
      • SavesPast TP can be troweled up to ½" thick without sagging. Chemical immersion is possible after 24 hours.
      • Cure at room temperature for 2.5 hours, then heat cure/elevated temperature for 4 hours @ 90°C..
  5. Cure:
    • Variations in cure may arise due to the amount of material being applied, the thickness of material being applied, the surface temperature, and the product temperature. The cure may be increased by applying external heat to the prepared surface before application of the product. This can be done with heat lamps, hot air gun, ELECTRIC BLANKET or other heat sources. Do not use open flame. The cure may be decreased by cooling the product before mixing.
      TEMPERATURE 5°C (41°F) 10°C (50°F) 15°C (59°F) 20°C (68°F) 25°C(77°F) 30°C (86°F)
      Movement or use involving no loading or immersion 4 hrs 3 hrs 21/4hrs 1 3/4 hrs 1 hr 3/4 hr
      Machining and/or light loading 6 hrs 4 hrs 3 hrs 2 hrs 1 1/2 hrs 1 hr
      Full electrical, mechanical or thermal loading 4 days 2 days 1 1/2 day 1 day 20 hrs 16 hrs
      Immersion in chemicals 5 days 4 days 3 days 2 days 1 1/2 days 1 day
      Rule of thumb: Every increase of 10° C above room temperature leads to a reduction of pot life and cure time by 50%

Our Bank Details
Beneficiary Name / Name on the Account : Monarch Industrial Products (I) Pvt Ltd
Current Account No : 622505009174
Branch : P.B.No.30,
627, Jay Maruthi Towers,
Periyakulam Road,
THENI - 625 531 TamilNadu State
Tel: 04546 – 254200
IFSC/NEFT/RTGS Code No : ICIC0006225
MICR Code : 625229102